When you are a total newbie, it is important to dodge the tricky process of wiring speakers and know how to wire speakers with 4 terminals.
Wired speakers with 4 terminals are a great way to improve the sound of your music. With 4 speaker wires terminals, you can connect two sets of speakers to your audio device for greater sound output.
This type of speaker setup is perfect for home theaters or gaming systems, and it can also provide a better listening experience when watching movies or playing video games.
The main advantage of using wire speakers with 4 terminals is the improved sound. With 2 speakers connected to your audio device, you will get a fuller, richer sound that can bring your music and movies to life. The wire length must be long enough.
Why Do My Speakers Have 4 Connections?
There are a few reasons why your speakers might have 4 connections. Firstly the most common reason is that it allows for improved sound quality. Secondly, you can create a more accurate and complete sound by having 4 connections. This is because you can connect speakers to different parts of the audio spectrum, which will create a fuller sound.
Additionally, by using different cables, you can also adjust the sound of your premium speakers feature. For example, using a thicker or higher quality speaker cable might provide better sound than a thinner or lower quality speaker cable.
How to Wire Speakers With 4 Terminals?
There are 3 main ways to wire speakers with 4 terminals. Lend us your ears to learn:
- Bi-wiring
- Bi-amp
- Leaving the conductor bar between terminals and connecting one set of speaker wires. Now you know how to wire speakers with 4 terminals.
How to Wire Speakers With 4 Terminals by Bi-wiring?
It is the most common way to wire 4-terminal speakers. By bi-wiring, you essentially split the signal into 2 separate paths, each going to a different speaker. This method gives you the best sound because it allows each speaker to work independently.
What is Bi-Wiring?

Bi-wiring is a method of wiring 2-way loudspeakers with separate woofers and tweeters. The woofer receives the frequencies, and the tweeter receives the high frequencies.
By using 2 separate speaker cables, one for each driver, you can take advantage of each driver’s crossover network.
A Step-By-Step Guide to Bi-Wiring speakers:
1. Disconnect the wire from the back of the respective speaker section.
2. Strip the insulation off of the end of each wire.
3. Twist the strands of wire together to form solid bi wire bridges.
4. Repeat steps 1-3 for the other wire.
5. Connect one end of each wire to a terminal to the respective speaker section.
6. Connect the other end of each standard speaker wire to the corresponding terminal on the other speaker.
7. Reconnect the wire to the back of the speaker.
How to Wire Speakers With 4 Terminals by Bi-Amping?
To get the best possible sound from your premium speakers, you need to know how to wire speakers with 4 terminals, and you may want to bi-amp them. It involves wiring two separate amps or bi-wire to the speakers – one for the normal frequencies and one for the higher frequencies.
By doing this, you can get more power to each frequency range, resulting in a better overall sound. Low-frequency ranges in sound are when the frequencies below 3,000 Hz are not audible. In addition, the high-frequency drivers generated by an acoustic wave are lower than the low-frequency drivers.
What is Bi-Amping?

Bi-amping is connecting two separate amplifiers to a pair of two speakers. You can achieve a higher level of audio quality performance than what you would get from a single amplifier. We consider a 6-ohm or 8-ohm speaker impedance as a good speaker impedance level. In addition, a single amp in speakers allows you to play audio signals from any component using only a pair of speakers.
To bi-amplify your speakers, you must connect each standard speaker’s positive and negative terminals to its own amplifier. In other words, one speaker will have its positive and negative terminals connected to the + and – terminals of one amplifier. While the other speaker will have its positive and -ve terminals connected to the + and – terminals of the other amplifier.
A Step-by-Step Guide to Connecting Speaker Wires by Bi-Amping:
1. Determine which amplifier you will use for the low frequency and which for the large frequencies.
2. Connect the positive terminal of the amplifier channel for the low frequencies to the positive speaker terminals.
3. Connect the negative terminal of the amplifier for the low frequencies to the negative terminal of the speaker.
4. Connect the positive terminal of the amplifier for the large frequencies to the speaker’s positive terminal.
5. Connect the negative terminal of the amplifier channel for the large frequencies to the negative terminal of the speaker.
6. Turn on both amplifiers and listen to the difference in sound.
7. Repeat steps 2-6 for the other speaker.
You can bi-amp your speakers and enjoy a better overall sound by following these simple steps. Now you know about the bi-amp system.
How to Connect Wire Speakers With 4 Terminals by Leaving the Conductor Bar Between Terminals and Connecting One Set of Wires?
If you want to connect wire speakers with 4 terminals, you can leave the conductor bar between terminals and connect one set of wires.
It will make sure that the current flow through the speaker properly. Ensure that you are careful when doing this, as it can be dangerous if done incorrectly.
A Step-by-Step Guide to Connecting Wire Speakers With 4 Terminals by Leaving the Conductor Bar Between Terminals and Connecting One Set of Wires:
- Make sure that you turn off and unplug the speaker.
- Remove the cover of the speaker.
- Locate the 4 terminals on the back of the speaker.
- Leave the conductor bar between terminals 1 and 2, and 3 and 4.
- Connect one set of wires to terminals 1 and 3, and the other set of wires to terminals 2 and 4.
- Replace the cover of the speaker.
- Plugin the speaker and turn it on.
- Test the speaker to make sure that it is working correctly.
- If necessary, adjust the sound settings on your device.
You can easily connect wire speakers with 4 terminals by following these simple steps. Ensure that you are careful when doing this, as it can be dangerous if done incorrectly.
How Do I Use Bi-Wiring Connections to Increase the Performance of My System?
Bi-wire-compatible speakers include 4 pin posts. It allows the speaker to split into two distinct sections, with terminals for both high-frequency speaker drivers. Alongside, low ones on each side of a middle section also share wire links. The same occurs as they are attached at their own bridges – one set going forward from your amplifier/source unit while another comes out behind it (if there is room).
Are These Connections Better Than Speaker Wire?
Contact forms come in all shapes and sizes, but they serve one purpose: contact! The connection type you use depends on your application. 1″ jack cables can be susceptible to interference if used too long or with other devices like amplifiers that generate heat (and increase voltage).
XLR connections offer better stability for recording studios because of their balanced audio signals technology. This is typically what regular speakers need when dealing with sustained loud sounds over time. Hemtap Sched Cables provide high-quality performance across genres thanks to their wide frequency range of supporting capability meaning there won’t be any compatibility issues between different makes/models of microphones and speaker output systems.
Which is Better — Bi-amp or Bi-wire or Leaving the Conductor Bar Between Terminals and Connecting One Set of Wires?
Each of these methods has its own benefits and drawbacks, so it ultimately depends on your individual needs and preferences. Bi-wiring offers better sound by separating the high and small frequencies, while bi-amping allows for even more customization and control over the sound.
Leaving the conductor bar between terminals can be dangerous if done incorrectly, so make sure that you are careful if you choose to do this.
Connecting one set of wires is the simplest and safest option, and it is still a viable method for increasing the performance of your entire system. Ultimately, it is up to you to decide which connection method is best for you.
Wrapping Up
There are several different ways to connect wire speakers with 4 terminals. You can easily connect wire speakers with 4 terminals by following these simple steps.
Ensure that you are careful when doing this, as it can be dangerous if done incorrectly. Always test the speaker to ensure it is working correctly before leaving the premises.
If you have any further questions, please don’t hesitate to contact us. We would be happy to help you out.