Why Is One AirPod Louder Than the Other?

Let’s Find Out!

Why Is One AirPod Louder Than the Other

The Apple AirPods operate faultlessly throughout their entire lifespan, even though they are subject to the possibility of malfunctioning at some point or another.

You may have several concerns connected to AirPods; for example, one AirPod may provide a louder sound than the other (our focus in this post today).

Read further to get answer to the questions “why is one AirPod louder than the others?”

Why Is One of My AirPods Louder Than the Other?

Why Is One of My AirPods Louder Than the Other

Once you begin playing music on your Airpod, even the slightest variation in the sound quality can be distracting. It may cause you to assume that your AirPods are faulty or malfunctioning. The first possible cause of the sound imbalance that you are experiencing might be because:

  • Problems with the audio signal’s balance
  • Damage to the AirPod due to a malfunction in the connection
  • Dirt may have accumulated in one AirPod more than the other, which is another answer to the question, “why does one AirPod sound louder than the other?”

This grime is most likely due to the buildup of ear wax in the device’s main speaker, which caused it to get dirty. To fix the issue, you will need to clean the AirPods from top to bottom carefully.

How to Fix Your AirPods When One Side Is Quieter?

How to Fix Your AirPods When One Side Is Quieter

This article addresses your concerns if your AirPods are becoming quieter over time, no longer have the same volume, or if one AirPod is louder than the other. If you’re considering purchasing a new pair, thinking they have become faulty, try the remedies we have listed here. In most cases, both AirPods are connected and there’s no sound. However, here, we’ve only discussed the scenario where one AirPod is louder than the other.

You may also be wondering whether your AirPods are malfunctioning, which is why you suddenly hear much less noise than before. However, before drawing any hasty conclusions, you should give some potential solutions a go; it’s conceivable that your AirPods are in excellent condition.

But the only thing you need to do to become a little cleaner is for your iPhone to receive more speech settings, which will repair the voice that your AirPods produce and make them louder.

Audio Volume Balance Slider

You might begin by examining the audio balance. Audio balance refers to how much loudness is coming from the left and right sides of the headphones at the same time. Adjusting the balance to the left or right will affect how loud the sound is. Using the following techniques, you may fix your audio balance issues:

  • You will find this information in the iPhone’s Settings menu.
  • Select Accessibility-Audio/Visual from the menu
  • In the options, you’ll see a slider. You can drag the slider to the center, right in the middle of the left and right channels. It will reset the audio balance back to its original setting. 

Clean Your AirPods

Clean Your AirPods

Dirt creeps into the AirPods every time you put them in and take them out, even though it seems like an easy remedy.

You may clean your AirPods with a soft toothbrush or by brushing the speakers. We performed some research and found that this is the best method. AirPods might be damaged if you apply too much force while putting them on.

Take a soft, clean towel and remove any remaining dirt from the teeth after brushing them with the toothbrush.

Using a tiny bit of water or alcohol is an option if desired. Isopropyl alcohol is the ideal choice for these situations since it evaporates fast.

Restart Your iPhone

The following solution is to restart your iPhone, which is a straightforward process, and we anticipate that all of you are familiar with how to restart your iPhone. If you are interested in knowing more about it, then you should follow the steps below:

  • Keep the power button of your iPhone down and hold it down while you wait for a sliding bar to appear on the screen.
  • When the slide bar appears, drag it to the right from the left and wait for your iPhone to shut down.
  •  Around 20 to 30 seconds, tap and hold the power button on your iPhone once again to turn it on.

Perform a Reset On Your AirPods

Resetting your AirPods may seem like an overly simplistic remedy, but the tried-and-true method of turning the device off and then back on again does work for any kind of Airpods, including second-generation Airpods! This method also comes in handy to fix AirPods that keep disconnecting.

These are the actions you need to do to reset AirPods:

  • Hold the button on the bottom of your AirPods case as you click it.
  • Wait till the status light flashes amber before switching to a white color.
  • Now your AirPods are reset to their factory defaults. If you want to determine whether or not this has resolved the problem, you should retry connecting your phone.

Reset All Settings on the iPhone

The iPhone’s “Reset all settings” option does not erase any data. Instead, the app’s settings will revert to their original factory defaults. As a result, you need to re-enter your passwords and battery settings.

Almost of iPhone problems happen due to software difficulties. In some instances, a factory reset might solve these issues, and you can do them using the methods listed below.

  • Reset your settings by selecting Settings > General > Reset
  • To reset all of your preferences, click the option labeled “Reset All Settings.”
  • When this happens, the iPhone will prompt you to enter the device’s passcode.
  • Proceed by entering the passcode.
  • Tap the button again that says “Reset All Settings.”
  • Finally, you’ll see a progress bar appear on the screen.
  • Wait until the Apple logo appears; this means that your device is restarting and will happen after the procedure is complete.

Take Out the Earwax

Take Out the Earwax

You may have to suck out the earwax from the speakers if they’re dirty. To do this, place a towel over the speaker’s mesh and keep it in place. Then, in between sucking on it, check the volume of your AirPods. If you see a change in the volume, continue with the procedure.

Airpods accumulate ear wax as a result of long-term usage. As a consequence, the speaker’s loudness reduces. Remember to place the cloth between your lips and the speaker. Wipe the AirPods surface after each blow with the cloth you grabbed earlier.

Relink the AirPods to Your iPhone

After disconnecting your AirPods from your iPhone, reattach them. It may address the issue where the right AirPod is much louder than the left AirPod.

Please be sure to follow these steps to implement this approach successfully.

  • Begin by navigating to the “Settings” app on your iOS device. Then, choose “Bluetooth” from the menu.
  • After that, you need to click on the symbol that looks like an “i.” You will find it close to the AirPods. Then choose the “Forget” option.
  • At this point, you need to confirm the process of forgetting. A few minutes later, you may go ahead and reconnect to the network.

Update Firmware

You need to update the firmware to eliminate any potential issues regularly. The software attached to the Airpods is the firmware. If you do not frequently update the firmware, this may create a variety of issues, one of which is a variation in the music’s volume level. Ensure you have linked the Airpods to the iPhone before continuing with the upgrade process. Take a look at the necessary stages, which are as follows:

  • Open Settings
  • Choose the General option.
  • Find your AirPods
  • Check to see whether the most recent update shows on the screen.
  • If not, continue with the process of upgrading the firmware.

Because upgrading the firmware takes time, you should do the update when you are asleep. Maintain proximity to the phone and the charging case for your AirPods so that everything continues to run correctly.

Airpods and iPhone Calibration

You may need to calibrate the Airpods with the iPhone. Your AirPods may suddenly cease comprehending the audio capabilities of your iPhone under certain circumstances. However, this is not a significant issue at the moment. Make use of the following strategies to achieve your goal.

  • Take out the AirPods, and the song will start at a much louder volume.
  • It is possible to obtain a volume level of 0 simply by utilizing the device’s volume buttons.
  • Now is the time to turn off the Bluetooth and check that you have correctly put AirPods into your ears.
  • Start playing the music again, but this time it should come out of the iPhone speakers rather than the Airpods.
  • Once again, lower the volume of the audio down to zero.
  • Reconnecting the Airpods and reactivating Bluetooth is required. You may be required to access the various settings applications on your device.
  • Navigate to “Bluetooth,” click on “Airpods,” and activate them once again.

Apple AirPods Replacement or Repair

Apple AirPods Replacement or Repair

If you are still experiencing the issue and wondering why one of your AirPods is louder than the other, the solution is straightforward: either one of your AirPods is faulty, or they need a repair. To accomplish this, you will need to contact Apple support or visit the nearest Apple repair facility and inquire whether it is possible to replace your AirPods. You can also visit your nearest Apple store.

After the warranty time has expired, you may submit a request to have your Apple AirPods repaired if this option is still available. If none of them work, then there is only one option left: to get another pair of Apple AirPods, which is pretty costly. Still, after going through every solution, it is almost unlikely that there is any hope left for your present Apple AirPods. 

Final Words

Whether your Airpods are brand new or you have been using them for a little while, you could have asked yourself, “Why is one Airpod louder than the other?” at some point. There is likely more than one explanation for why the same issue is occurring.

Also, please remember, you may encounter this issue even if you’re dropped AirPods in water. In this case, it’s best to follow instruction to eliminate water from your AirPods, including using our “Fix My Headphones” tool to eject water.